Yesha Lab Equipments

Specification: The slump cone in these slump test apparatus is filled with freshly mixed concrete and tamped with a tamping rod in three or four layers. The top

of the concrete is leveled off with the top of the slump cone, the cone is lifted vertically up

and the slump of the sample is immediately measured. The complete slump test apparatus set comprises of a Steel Octagon Base Plate (8 faces) with carrying handle, Graduated Tamping Rod 16mm dia. x 600mm long with one bullet end, slump cone having base

We are a supplier of civil and mechanical Lab equipment, like Cube testing machine, cube molds, Auto level, Total station, Oven, Rapid Moisture meter, etc.

The instrument is used for work ability as well as

consistency of fresh concrete. A slump Cone and a graduated rod supplied with the instrument helps the operator to find out slump values and vibration table with container and acrylic disc is used to find out work ability of concrete expressed in Vee Bee degrees, which is defined as the time in seconds to complete required vibrating at which the fresh concrete flows out sufficiently to come in contract of the entire face of acrylic disc. Specification : The equipment consists of : A vibrating table size 380mm long and 260mm wide, resting upon elastic support at a height of about 305mm above the floor, complete with Start/Stop switch, cord and plug. A holder is fixed to the base in to which a swivel arm is telescoped with funnel and guide swivel arm is also detachable from the vibrating table. The divisions of scale on the rod record the slump of the concrete in millimeters. Supplied complete with a sheet metal container with lifting handles which can easily be fixed to the vibrating table. A slump cone open at both ends with lifting handles and a tamping rod of size 16mm dia and

• Dividing quantity: 200-1500g
• Motor power: 25W
• Motor rotational speed: 0-1440r/min (may continuous adjustable)
• Dividing error: Less than ± 0.5% per kilogram
• Working voltage: 220V 50Hz

As Per IS 1727 1967, IS 4031 1968, ASTM C 394, C 64 For making standard rectangular