Call 08048615821 76% Response Rate

Send Email

Bitumen Testing Equipments

Owing to the extensive industry experience, we have been successfully providing our customers with Bitumen Testing Equipment. All our products are procured from the reliable and certified vendors of the market, who make these as per international quality norms & standards. Moreover, our products are widely appreciated by the customers due to their longer functional life, corrosion resistance and result accuracy.
Marsh Cone With Stand Brass Cone
  • Marsh Cone With Stand Brass Cone
  • Marsh Cone With Stand Brass Cone
  • Marsh Cone With Stand Brass Cone
  • Marsh Cone With Stand Brass Cone
  • Marsh Cone With Stand Brass Cone

Marsh Cone With Stand Brass Cone

Product Price: Rs 6,600 / NumberGet Best Price

Minimum Order Quantity: 1 Number

Product Brochure

Product Details:
Model Name/NumberYLE Marsh Cone
BrandYLE
ColorWhite
MaterialMS
FinishPolished
Surface TreatmentColor Plated
Water Value15S+-0.5s
HeightUp to 1 m
Marsh Cone with Stand The marsh funnel viscosity respectively the funnel flow time is the ratio of the speed of the sample fluid as it passes through the orifice to the amount of force that is causing the fluid to flow. The marsh funnel viscosity is reported as the number of seconds required for 1000 cm³ of sample fluid to flow out of a full marsh funnel.
Get Best QuoteRequest A Callback
Softening Point Apparatus

Softening Point Apparatus

Product Price: Rs 6,500 / PieceGet Best Price

Product Brochure

Product Details:
MaterialMS
Model Name/NumberYLE Ring and Ball
PhaseThree
ColorBlue
TypeElectric or Manual
Driven TypeElectric
ConditionNew
Also called Softening Point Apparatus. This apparatus is meant for determination of softening point of bituminous materials according to IP 58 and IS 1205 Softening point is that temp. at which the specimen under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition. The apparatus consist of Glass beaker of heat resistant glass of internal dia 8.5 cm X 12 cm depth (approx.), Two steel balls each of 9.5mm dia, Two tapered brass rings, Two ball guides, ring stand and a hand stirrer. Hand Operated.

Specifications:

  • Measurment temperature accuracy: ±01ºC
  • Automatically increase of temperature per minute: 5ºC
  • Timer accuracy: 1S
  • Steel ball weight: 350±005g, diameter: 950mm
  • Tempurature display: 002ºC
  • Water in the beaker is agitated by magnetic stirrer
  • The test is performed in duplicate under closely
  • controlled conditions
  • Temperature control: Water is used as the bath
  • medium for binders with softening points below 80oC
  • Above this temperature glycerol is used in place of water
Get Best QuoteRequest A Callback
Marsh Cone
  • Marsh Cone
  • Marsh Cone
  • Marsh Cone

Marsh Cone

Product Price: Rs 6,100 / NumberGet Best Price

Minimum Order Quantity: 1 Number

Product Brochure

Product Details:
MaterialPlastic
Hole DiameterUp to 5 mm
LengthUp to 100 mm
Specifications:

  • Max Feeding: 35-90mm
  • Speed of Rotary: 200-350r/Min
  • Capacity: 5-40t/Hour
Get Best QuoteRequest A Callback
Ductility Testing Apparatus

Ductility Testing Apparatus

Product Price: Rs 35,000 / UnitGet Best Price

Product Details:
Voltage (V)240 V
PhaseSingle
Frequency (Hz)50 Hz
Speed (RPM)Up to 15000 Rpm
With the inclusion of modern techniques, we are engaged in offering Ductility Testing Apparatus. This testing apparatus consists of a water bath with a thermostatic heater and a circulating pump in order to maintain uniform water temperature. Our offered testing apparatus is checked on numerous parameters before supplying in the market. Customers can avail the offered testing apparatus from us in various specifications as per their requirements.

Specifications:

  • Control switches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath, complete with three briquette moulds and one base plate, all made of brass
  • Operates on 230 volts A.C. single phase
  • Rate of 50mm/minute ±25mm per minute
  • Temperature of 27ºC ± 0.5ºC
  • Thermometer IP 38 C, range 23ºC to 27ºC
  • Ductility mould with base-plate

Features:

  • Excellent performance
  • Low operating cost
  • Easy installation
Get Best QuoteRequest A Callback
Universal Automatic Compaction Apparatus

Universal Automatic Compaction Apparatus

Product Price: Rs 25,000 / PieceGet Best Price

Product Details:
Power (HP)Up to 2 HP
Automation GradeAutomatic
Voltage (V)240 to 440 V
It is a motor driven mechanical compactor useful for soil compaction into 100mm or 150mm dia moulds. Two sets of rammers are provided, one of 2.6kg. And the other of 4.89 kg arranged for 310mm and 450mm fall respectively. For compaction soil into 150mm dia moulds, 100mm face dia rammers having weight of 4.89Kg is used. Where as for 100mm dia moulds, they are of 50mm dia. The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the soil layer. When the rammer reaches the required height the pawl release the rammer, which falls freely on soil surface. The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The base plate of the specimen mould is to be fitted to the rotating base plate of the instrument which makes 1/5th revolution per operation. Operation on 230 volts, 50 cycles, single phase, A.C. supply, Moulds are to be ordered separately.

Specifications:

  • Power: 700 W
  • Ignition Way: Automatic Digital Ignition
  • Printer: Thermo Sensitive Printer
  • Testing Method: High Precision Flame Ionization Test
  • Trademark: HK
  • Specification: 550 × 310 × 400(mm)
  • Rated Voltage: AC220V±10%, 50Hz
  • Operating Model: LCD Touched Screen
Get Best QuoteRequest A Callback
Marshall Stability Test Apparatus
  • Marshall Stability Test Apparatus
  • Marshall Stability Test Apparatus
  • Marshall Stability Test Apparatus
  • Marshall Stability Test Apparatus
  • Marshall Stability Test Apparatus
  • Marshall Stability Test Apparatus
  • Marshall Stability Test Apparatus

Marshall Stability Test Apparatus

Product Price: Rs 44,000 / UnitGet Best Price

Product Brochure

Product Details:
Voltage (V)240 to 440 V
Automation GradeAutomatic
Frequency (Hz)50 Hz
PhaseThree
Used for the measurement of resistance to plastic flow of cylindrical specimens of bituminous paving mixtures when tested in a marshal load frame. Test specimens are produced and tested at a speed of 50.8mm/min.The maximum load (stability) and deformation (flow) of the specimen are recorded. Generally the test is applicable to hot mix designs using bitumen and aggregate of maximum size of 25mm. Widely used for designing and evaluating bituminous paving mixes.

Specifications:

  • Test Speed: Without load: 50± 2mm/min
  • With load: 50± 5mm/min
  • Max. Load: 50kN
  • Accuracy: ± 1%
  • Flow range: 0~100(0~10 mm)
  • Accurary: ± 1%
  • Specimen size: φ 152.4× 95.3 mm φ 101.6× 63.5mm
  • Power: 380V, 50Hz, 550W
  • Net weight: 205kg
  • Dimensions: 770x530x950mm
Get Best QuoteRequest A Callback
Flash Point Apparatus

Flash Point Apparatus

Product Price: Rs 5,500 / PieceGet Best Price

Product Brochure

Product Details:
MaterialMS
Power SupplyElectric
Voltage240 to 440 V
Flash & Fire Point Apparatus used for determining the flash point of fuel oils and lubricating oil, bitumen other than cutback bitumen and suspension of solids in liquids, having a flash point above 49°C. The apparatus consists of brass test cup with handle removable cup cover with the spring operated rotated shutter having oil test jet flame device, stirrer with flexible shaft. The assembly rests in air bath which is covered with dome shape metal top. The cup assembly is positioned in a cast iron air bath, fitted with a chrome plated brass top having electric heater with temperature controller. Suitable for operation on 220V, 1Ph, 50Hz AC Supply.

Specifications:

  • Test range: Room temperature-350ºC
  • Resolution: 0.1ºC
  • Repeatability: Flash point<104ºC,allowed ±1ºC; flash point≥104ºC allowed ±2ºC flash point≤110ºC,allowed ±1ºC; flash point>110ºC allowed ±2ºC
  • Printer: High speed thermal printer,paper size:55mm
  • Temperature Detection: Imported platinum resistance (Pt100Ω)
  • Ignition mode: Automatically electronic ignition with airs source
  • Self-checking : Automatic fault checking
  • Power consumption: <550w
  • Temperature: Atmospheric temperature: 10ºC-45ºC,humidity: 30-80%
  • Power: AC220V±10%
  • Dimension: 397*305*240 mm
  • Weight: About 15 kg
Get Best QuoteRequest A Callback
Bar Cutting

Bar Cutting

Product Price: Rs 90,000 / NumberGet Best Price

Product Details:
Voltage (V)240 V
Motor Speed (RPM)Up to 2500 RPM
Power SourceElectric
Automation GradeAutomatic

Max Cutting Dia :
Plain Carbon - Steel 40 mm
II-Grade Rebar - Steel 32 mm

Cutting times/min : 32
Motor Power : 3kw (4hp)
Voltage : 415-3P/50 Hz
Motor RPM : 2880
Weight : 394 kg
Dimension : 1170 X 420 X 640 mm

Get Best QuoteRequest A Callback
Constant Temperature Water Bath

Constant Temperature Water Bath

Get Latest Price

Product Brochure

Product Details:
MaterialPlastic
Power SourceElectric
Voltage240 V
A boon to pharmaceutical and petroleum industries oil refineries and universities etc. Raagaa constant temp. water baths are meant primarily for viscosity determination of liquid. Fully automatic with performance accuracy better than  ± 0.01à & °C. Backed by efficient indigenous technology having a based proportional digital indicating controller with PT100 sensor system, we are capable of providing our products at market leading prices. External circulation facilities at highly stable temperatures have also been made available. It can also be applied in general laboratory routine tests kinetic studies and so on in universities educational institutions.

The working chamber made out of selected grade thick brass SS sheet heavily nickel plated to withstand corrosion is mounted in a pressed aluminum cabinet with proper air gaps to avoid heat losses due to conduction. The inner tank is with toughened glasses mounted on silicone rubber gaskets. The exterior cabinet is properly recessed to accommodate outer glasses to minimize transfer of heat to the bath media. The circulation stirrer unit accommodated near the heaters in a separate compartment separated by a wire arrangement make the bath obstruction free for use. The control devices are suitably mounted to withstand heat etc.

Specifications:

  • Power supply: AC220V±10%,50Hz±5%
  • Heating power: 1700W
  • Stirring motor: Power 6W, rate 1200r/min
  • Temperature range: Ambient to 100ºC
  • Temperature control precision: ±0.1ºC
  • Constant temperature bath: 20L, double shell
  • Working environment: Ambient -10ºC~+35ºC,RH <85%
  • Temperature sensor: Pt100, RTD
  • Maximum power consumption: 1800W
  • Overall dimension: 530mm×400mm×670mm(Bath is included)
Get Best QuoteRequest A Callback

Ductility Testing Apparatus

Product Price: Rs 30,000 / NumberGet Best Price

Minimum Order Quantity: 1 Number

Product Brochure

Product Details:
PhaseSingle
Voltage230, 210-390
Automation GradeAutomatic
TypeElectric
Gradeas per is
MaterialStainless Steel
Power230v
BrandYesha Lab Equipments
ColorBlue
Temperature100
Capacityas per Is
Frequency50hz, 50
Finishing Typegood
Model Name/NumberYLE4789
Speed (RPM)1440

With the inclusion of modern techniques, we are engaged in offering Ductility Testing Apparatus. This testing apparatus consists of a water bath with a thermostatic heater and a circulating pump in order to maintain uniform water temperature. Our offered testing apparatus is checked on numerous parameters before supplying in the market. Customers can avail the offered testing apparatus from us in various specifications as per their requirements.

Specifications:

Control switches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath, complete with three briquette moulds and one base plate, all made of brassOperates on 230 volts A.C. single phaseRate of 50mm/minute ±25mm per minuteTemperature of 27ºC ± 0.5ºCThermometer IP 38 C, range 23ºC to 27ºCDuctility mould with base-plate
Features:

Excellent performanceLow operating costEasy installation



Additional Information:

  • Item Code: 45895
  • Production Capacity: 5
  • Delivery Time: ex stock
  • Packaging Details: extra
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Yesha Lab Equipments. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.